35mm 3D Models

Find the best 35mm 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Make an elbow joint that’s 90 degrees. Inside part fits tight in a 25mm tube and goes 3 inches deep. Outside part covers 3 inches on the outside of the tube. Tubes meet inside the elbow’s corner. Make it strong.

Anonymous1779405299

Anonymous1779312425

Anonymous1772685047

Anonymous1775493259

Anonymous1758872063

A simple 3D printable divider tray insert for a square box, optimized for FDM printing with a 0.6mm nozzle.

The tray is 100mm x 100mm overall size, with a total height of 35mm.
It contains 10 compartments arranged in a 5x2 grid layout.

Each compartment is rectangular and evenly spaced.
Walls are thick (1.6mm) and solid, with no thin features.
The base is flat and about 2mm thick.

Include small semi-circular finger cutouts on the top edge of each compartment to allow easy access to contents.

Design must be clean, minimal, and functional.
No textures, no decorations, no small details.
All edges slightly rounded or chamfered for strength.
no thin walls, no fine details, no decorations, no text, no complex shapes, no overhangs, no supports required, no fragile parts

The model must be sturdy, easy to print, and require no supports.

Anonymous1761497726

Anonymous1777414519

A single solid matte grey cylinder, exactly 110mm diameter and 270mm height. CRITICAL INSTRUCTION: Do NOT create any raised relief or external volume on the surface. Instead, SUBTRACT and CARVE deep U-shaped channels INTO the solid body (9mm deep, 18mm wide). FULL GRID PATTERN: Generate a dense, continuous grid covering the entire surface from Z=0 to Z=270. This grid must be formed by the intersection of:

Clockwise spiral grooves (35mm vertical pitch).

Counter-clockwise spiral grooves (35mm vertical pitch).

A series of horizontal 360-degree circular grooves stacked vertically every 35mm.
All channels must merge flawlessly at their intersections. There must be NO flat solid margins at the top (Z=270) or bottom (Z=0). The result must be a single manifold solid with negative space channels for a 17mm LED insert.

Anonymous1777419695

Anonymous1759243164

Anonymous1776135350

Anonymous1775312403

BARRA RECTANGULAR CON LAS SIGUIENTES MEDIDAS: 0.6MM, 0.7MM, 35MM

Anonymous1772731307

Create a photorealistic 3D model of a Canon RF 35mm L-series lens with accurate real-world proportions. The lens body should be matte black with fine micro-texture (roughness ~0.4–0.6). Include the iconic red ring near the front element with a glossy finish.

Model the focus ring and control ring with detailed rubber ridges and directional grooves. Add engraved text: “Canon”, “35mm”, and aperture markings, slightly embossed or engraved with subtle wear.

The front glass should use realistic shaders (IOR ~1.5) with anti-reflective coating showing green/purple tint and internal reflections. Include lens elements depth.

Add metallic mount with polished steel, screws, and electronic contacts. Include subtle imperfections: dust, fingerprints, micro scratches.

Lighting: studio HDRI with soft highlights and rim light to emphasize shape. Use global illumination and soft shadows for high-end product realism.

Anonymous1757301288

Anonymous1774720914

3D打印外壳，一体式，尺寸130×70×35mm，壁厚1.2mm，无支撑易打印，STL格式。正面居中两个15mm超声波孔，间距20mm；孔正上方居中雕刻文字“思源喝水提醒器”，孔正下方居中画弧形小嘴巴，三者上下对齐。背面开10mm蜂鸣孔、12mm按键孔，背面下方预留USB和电源接口开孔。整体简洁方正。

Anonymous1774544325

A circle with a diameter of 35mm, a thickness of 2 cm and an outer diameter of 40mm, 2.5 mm wall thickness, the description refers to this hole in the picture

Anonymous1774449118

Anonymous1774366624