Camera mount 3D Models

Find the best Camera mount 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1779971952

3D printable clamp-style camera mount that grips around a cylindrical tube of approximately 32mm diameter (gas spring arm body). The clamp consists of two half-circle jaws that wrap around the tube and are tightened together with two M4 bolts on each side. The clamp body is about 50mm wide and 40mm tall. On top of the clamp, there is a flat horizontal platform (60mm x 40mm x 8mm) with a centered 1/4-20 female thread socket (6.35mm hole, 10mm deep) for attaching a camera or ball head mount. The clamp should have smooth inner surface to grip without scratching. Matte black plastic appearance. Functional, minimal industrial design. No sharp edges. Bolt holes are 4.5mm diameter with recessed hex nut traps on one side.

Anonymous1778693343

Anonymous1779213956

Anonymous1760260291

Anonymous1773356920

Anonymous1779340667

Anonymous1750049253

Anonymous1778980226

Anonymous1753047106

Anonymous1778433022

Create a simple mechanical camera mount inspired by an owl neck spine. Model a flat base plate with 4 screw holes. From the base, build a vertical “spine” made of 8 short cylindrical segments stacked like vertebrae. Between segments add simple hinge/ball-joint connectors (basic spheres or pins). On top add a rectangular FPV camera bracket. Add a small cylindrical motor on the side of the base and a simple gear/belt connection to the first segment (very simplified). Keep low-medium detail, smooth surfaces, slightly rounded edges, minimal bolts. No sci-fi style, no complex textures. Neutral grey material. Separate parts if possible.

Anonymous1778777066

Anonymous1768921352

Anonymous1770193584

Anonymous1777087084

Anonymous1768849749

Anonymous1748987207