?

Car grille 3D Models

Find the best Car grille 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
medusa-headholstein-cowred-mushroomlightsaber
Anonymous1745555385
Anonymous1780040677
Anonymous1765879255
Anonymous1770258213
Anonymous1770258213
Anonymous1731187176
Create a production-ready, watertight 3D CAD automotive model of a headlight bezel with a dense vertical phantom grille style, optimized for direct STL file export and 3D printing. The outer frame geometry must strictly follow the OEM Volkswagen Brasilia parallelogram contour, measuring exactly 390mm in total length, 210mm in height, and an outer shell depth of 38mm with a 75-degree slanted side profile to perfectly match the vintage car's front fender line. The internal design must feature a continuous pattern of clean vertical grille slats. Each vertical slat must have a precise thickness of 3.20mm, a depth of 15.00mm, and a uniform gap of 10.00mm between each slat. The central section between the dual projector beam locations must integrate a dual-point hidden mounting system with exactly two 5mm fastener holes (one positioned at the top center, and one at the bottom center, aligned vertically). These mounting points must be fully disguised and recessed within the depth of the verti
Anonymous1779285946
Create a 3D CAD automotive headlight bezel part with a Dodge Charger 1970 phantom grille style, ready for 3D printing. The shape must be trapezoidal to match a vintage car front. The top width must be exactly 448mm, the bottom width must be exactly 430mm (incorporating a 1mm clearance on each side), and the total vertical height must be 169mm. The total depth is 38mm with a slight curve on the outer edge. Inside this trapezoidal frame, place 12 horizontal grille slats (bars). Each slat must have a thickness of 3.2mm and a depth of 15mm. On the back, include 3 recessed mounting brackets with 5mm screw holes (two on the upper corners, one centered at the bottom), recessed 5mm from the front face. Watertight STL.
Anonymous1779285946
Anonymous1779111958
Anonymous1778879800
Anonymous1777931009
Anonymous1746144029
Anonymous1777998830
Anonymous1774463551
Anonymous1774463551
Anonymous1777410784
Anonymous1776887133
Anonymous1769174238
Enter invite code to get credits!