?

Forefoot 3D Models

Find the best Forefoot 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
five-toedayaklarpiernas-sontoes
Chunky wedge sandal platform sole only, no straps, no upper, no O-rings, no laces, no hardware whatsoever. Form: Thick platform wedge heel with contoured ergonomic footbed, flat top surface with slight heel cup and toe spring, sturdy base. Exact shape and proportions matching the reference image. Dimensions: Total length exactly 11.3 inches (287 mm) heel to toe, medium width \~4.0 inches (102 mm) at ball of foot, platform height 1.2-1.5 inches under forefoot rising to 4.5-5 inches total heel height. Material: Realistic wood-grain texture on sides and heel, subtle tread pattern on bottom for grip, durable solid construction with minimum 2.5-3 mm wall thickness. Key Details: Clean manifold watertight mesh, high structural integrity for 3D printing in TPU or flexible filament, ergonomic footbed contour suitable for full-size wearable shoe. Style: Highly detailed, realistic product prototype, clean topology, print-ready, high resolution.
Anonymous1779211330
Create a solid full-length orthopedic height-increase insole, shaped like a normal shoe insole with a longitudinal wedge profile. The model must have a smooth height drop from the heel toward the front, like a real heel lift insole. Important geometry: - The heel is the highest part. - Rear outer heel side height: 3.5 cm. - Central heel standing surface height: 3.0 cm. - From the heel area forward, the insole must gradually taper down in height along the length of the foot. - The height must decrease smoothly and naturally from heel to toe. - The front/toe area must become thin, like a normal insole. - The top surface must stay continuous, usable, and foot-shaped. - The bottom surface must be stable and mostly flat. - The side profile must look like a clean wedge: high at the heel, lower at the arch, thin at the toes. Do not twist the model. Do not bend the forefoot upward or downward. Do not create a bowl, cup, hollow, basin, concave pocket, or deep side walls. Do not create a spoo
Anonymous1767912887
Create a solid orthopedic heel lift insole, NOT a cup, NOT a bowl, NOT a concave shape. The model must be a full-length shoe insole with a raised heel wedge. The top surface must be mostly smooth and gently convex or flat, without any hollow, depression, basin, cavity, cup, trench, or bowl shape. Most important geometry: - Rear heel area has a raised height. - Outer rear heel side edges are 3.5 cm high. - Central heel walking surface is 3.0 cm high. - The difference between 3.5 cm side edges and 3.0 cm central heel surface must be a very gentle natural slope, not a hollow. - The heel surface must remain usable for standing and walking. - The top surface should support the foot, not surround it like a cup. - No deep side walls. - No vertical rim. - No basin. - No heel cup. - No concave pocket. Shape: A solid full-length orthopedic insole with a wedge-shaped heel lift. Flat stable bottom. Smooth upper surface. Rounded edges. Gradual taper from heel height toward the forefoot. Anatomic
Anonymous1767912887
Orthopedic full-length heel lift insole, 3D printable solid model. Adult size, about 27.4 cm long and 9.2 cm wide. Rear heel side rim height 3.5 cm, central heel walking surface height 3.0 cm. Smooth proportional slope from the 3.5 cm raised rear side edges down to the 3.0 cm heel platform. Smooth anatomical top surface, flat stable bottom, rounded edges, gradual transition toward midfoot and forefoot, medical functional design, no logos, no text, no holes.
Anonymous1767912887
Anonymous1776702966
Geometry & Shape Ergonomic insole with slim forefoot and elevated heel Smooth continuous slope from front to heel Heel is thick and raised with 3 visible stacked layers Edges are rounded, clean, and premium Maintain exact silhouette and proportions from reference Heel Capsule (Key Feature) Embedded oval gel capsule in heel Shape: smooth oval, slightly protruding Material: glossy, translucent Color: deep red edges blending into warm orange center (amber glow) Glass-like reflections with depth (liquid/air cushion feel) Surrounded by a metallic housing frame Materials & Finishes Main body: Dark graphite / metallic grey Subtle brushed metal texture Heel capsule: Transparent glossy red-orange Bottom: Matte dark rubber with fine grip texture Top front pad: Oval fabric-like texture (dark grey, anti-slip) Layered Heel Structure Heel consists of 3 stacked segments Slight separation lines between layers All layers follow same curvature Smooth transitions, no sharp cuts Typography (Exact Match Re
Anonymous1775721085
🔧 1. Overall Insole Dimensions (Base Reference) Use this as the master profile (EU 42 / UK 8 / US 9) — scalable later. • Total Length: 275 mm • Max Width (Forefoot): 92 mm • Mid Width (Arch): 62 mm • Heel Width: 68 mm • Base Thickness (front): 4 mm • Heel Thickness (without layers): 18 mm • Max Height (with all layers): 38–42 mm 🧱 2. Layer Structure (Modular System) Layer Breakdown (as seen in your design) 🔹 Top Layer (Comfort Layer) • Thickness: 4 mm • Material: EVA / PU foam • Texture zone (front pad): o Length: 95 mm o Width: 75 mm o Thickness: included in 4 mm 🔹 Arch Support Layer • Thickness: 6 mm • Arch height rise: 12 mm from base • Arch peak location: ~60% of length from toe (~165 mm) 🔹 Modular Lift Layers (Stackable) Each layer: • Thickness: 10 mm each • Quantity: 2–3 layers • Lock system: o Male peg: Ø6 mm × 3 mm height o Female slot: Ø6.2 mm × 3.2 mm depth • Placement: o 2 pegs per layer (heel + mid) 🔹 Heel Core (Gel Capsule Housing) • Ca
Anonymous1775721085
整體輪廓 類型：開放式涼鞋（open-toe sandal） 結構：由前掌承載面 + 足背帶 + 踝帶 + 超高細跟構成 外形比例： 鞋長約為腳長的 0.95–1.0 倍（前端略短） 鞋跟高度約為鞋長的 0.9–1.1 倍（極高跟設計） 前掌（Toe Platform / Forefoot Base） 幾何形狀： 平面為橢圓形截斷（truncated ellipse） 前端略為方圓混合（rounded-square） 厚度： 約為鞋長的 2–3%（極薄） 邊緣： 倒角（bevel）或小圓角（fillet），半徑約 1–2 mm（相對尺度） 底部： 幾乎完全平坦（無明顯弧度） 前足帶（Toe Strap） 位置：橫跨腳趾根部（metatarsal area） 幾何： 截面為扁平長方形（rectangular strip） 寬度：約為鞋寬的 0.35–0.45 厚度：約為寬度的 10–15% 曲率： 沿腳背方向略微弧形（單軸曲率） 無明顯扭轉 足背裝飾帶（Instep Strap） 結構： 一條細帶橫跨足背 幾何： 截面接近圓角矩形（rounded rectangle） 寬度：約為前足帶的 30–50% 附加物： 中央有球形或半球形突起（ornamental nodes） 直徑約為帶寬的 0.8–1.2 倍 踝帶（Ankle Strap） 結構： 繞腳踝一圈，並有扣環固定 幾何： 細長帶狀（similar to a narrow ribbon） 截面為薄矩形 寬度：約為前足帶的 20–30% 連接方式： 與鞋底後側透過**細桿（connector strut）**連接 連接點位於鞋跟上方 鞋跟（Heel / Stiletto） 類型：極細高跟（stiletto） 幾何： 主體為細長圓錐（tapered cylinder / cone） 上端直徑：約為鞋長的 3–5% 下端直徑：約為上端的 30–50% 曲線： 非完全直線，略微後傾（約 5–10°） 高度： 約為鞋長的 90–110% 接地點： 極小圓形接觸面（point-like contact） 鞋底後段（Heel Base） 幾何： 後跟區域為薄楔形（thin wedge） 從前掌向後逐漸上升 曲率： 底面為平面，上表面略符合足弓（輕微曲面） 整體結構關係 前掌、鞋跟、踝帶形成三點支撐結構 視覺重心偏後（因高跟）
Anonymous1772641402
A high-detail 3D model of a sneaker outsole, designer style, top view with slight perspective. The outsole features an organic irregular pebble pattern inspired by natural rocks. The shapes are smooth, flowing, and non-geometric. All irregular shapes are slightly raised (about 2–4mm), forming a continuous but controlled texture. Pattern density is balanced: - forefoot and heel areas: denser pebble texture - midfoot: cleaner and more open spacing Center logo: - a circular raised platform - inside, recessed engraved letters "JXZ" - strong contrast between raised base and carved letters Add a few smaller circular raised elements in forefoot and heel for visual rhythm. Material: matte black rubber with subtle rough texture. Edges: rounded and soft, not sharp. Style: fashion designer outsole, minimal, refined, not rugged, not hiking boot. Lighting: studio lighting with soft shadows to highlight depth. High-quality geometry, clean topology, realistic proportions. Negative: no hiking
Anonymous1773198689
Anonymous1755663170
مصطفي حاتم
Anonymous1743379593
Anonymous1717200328
Generate a high-detail 3D model of the football boot outsole shown in the reference image. Only recreate the outsole (soleplate and studs). Do NOT generate the upper, shoe body, laces, or any additional footwear elements. Accurately replicate the stud pattern, stud placement, stud shapes, and soleplate geometry from the image. Preserve proportions, spacing, and orientation of each stud exactly as shown. The outsole should include: Forefoot and heel stud zones with precise positioning Central midfoot structure/bridge visible in the reference Surface textures and grooves from the soleplate Top surface (footbed side) should remain minimal and flat, with no upper attachment structures. IMPORTANT: No logos No text No branding No full shoe reconstruction Only the isolated outsole component The final model should appear as a detached product part, centered, clean, and isolated. Style: realistic, precise, product design accuracy Material: neutral (matte or slightly glossy plastic/composite) Output: clean 3D
Anonymous1774769509
Anonymous1774648059
Anonymous1774600774
Anonymous1773046656
Anonymous1774291340
Enter invite code to get credits!