3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1775337632
04-04 21:26
Model Name
evangelion unit-01 3d model
Tags
character
rendering
stylized
Prompt
1. Evangelion Unit-01 – precise body configuration Unit-01 is in a deep kneeling firing stance with extreme forward compression: Lower body: The right leg is fully folded beneath the torso. The knee is in contact with the ground plane, bent beyond 130 degrees. The shin lies angled slightly outward, with the foot tucked behind and rotated so the sole faces partially upward. The left leg is planted forward with the knee bent approximately 90 degrees. The left foot is flat, angled slightly outward (~20 degrees), acting as the primary forward stabilizer. The pelvis is lowered close to the right heel, creating a compact base. Torso and spine: The torso is heavily leaned forward (~40 degrees), with a pronounced forward curvature compressing the abdominal armor. The chest is nearly parallel to the rifle’s rear section, aligning the upper body with the weapon’s axis. Shoulders and arms: The right shoulder is drawn back slightly and locked, acting as the primary recoil anchor. The left shoulder is pushed forward and downward. The right arm is bent at roughly 90 degrees, elbow tucked inward. The right hand grips the rear handle assembly tightly. The left arm is extended forward but not fully straight (~150 degrees at elbow), reaching under the rifle’s midsection. The left hand supports a structural housing rather than the barrel directly. Head and neck: The head is thrust forward with the neck compressed. The chin is slightly tucked; the horn projects forward in parallel with the rifle barrel. The gaze direction aligns exactly along the rifle’s longitudinal axis. Color and surface segmentation: Primary armor: deep purple across limbs and torso. Bright green inserts: embedded along shoulders, forearms, thighs, and head, following panel seams. Black flexible joints: visible at elbows, knees, hips, and neck. Small orange accents: present at joint interfaces and minor panel details. 2. Positron rifle – detailed structural breakdown The rifle is not a single continuous piece; it is a multi-section assembly combining a main barrel, rear energy housing, and a large forward support frame. A. Rear stock and grip assembly The rear terminates in a yellow-orange angular stock with a flat rear face pressed into the right shoulder. The stock transitions into a blocky grip housing: The grip is vertical and rectangular. A squared trigger guard protrudes forward. Above and forward of the grip is a dense mechanical cluster: Includes layered metallic components and a cylindrical coil structure mounted horizontally. The coil is ribbed, evenly segmented, and sits slightly above the main rifle axis. B. Central receiver and energy section Immediately forward of the grip is a thick, irregular central body: Asymmetrical, with exposed mechanical detailing. Contains a bundle-like structure (ribbed tubing or cable housing) that curves slightly backward toward the Eva. This section is visually the densest, with overlapping plates and mechanical interfaces. The Eva’s left hand supports this exact region, palm up against a flat underside surface. C. Barrel The barrel extends forward as a long, pale blue rectangular beam: Cross-section is mostly rectangular with slight beveling. It remains perfectly straight and horizontal. Along the top is a continuous raised strip, thinner than the main body. The barrel includes small segmented breaks indicating modular construction. D. Forward support frame (ground brace) Beneath the barrel is a large teal support structure resting on the ground: This structure consists of a rectangular base block with angular edges. Two thin black support struts extend diagonally upward from the base to the underside of the barrel. The struts form a triangular support geometry, stabilizing the barrel’s forward mass. The base includes mechanical detailing and small panel lines, with minor yellow accents. E. Muzzle The muzzle is a slightly widened rectangular termination: The front face is flat with a recessed opening. A small ring-like detail encircles the tip, contrasting with the otherwise angular geometry. F. Color distribution Rear stock and grip: yellow-orange. Central mechanical section: mixed gray and metallic tones with dark tubing. Barrel: pale blue. Support frame: teal with black struts and small yellow highlights. Alignment and interaction The rifle forms a continuous straight axis from stock to muzzle, aligned with Unit-01’s head and torso. The right shoulder → right arm → grip → barrel creates a rigid linear chain. The left hand acts as a mid-point stabilizer, while the forward ground brace absorbs the front weight, forming a three-point support system: Shoulder (rear anchor) Left hand (mid support) Ground frame (forward support) All components are positioned to maintain a perfectly level barrel with no vertical deviation.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
