3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777598273
05-08 13:49
Model Name
two-part sphere mold 3d model
Tags
props
3d printing
realistic
Prompt
2 Part spherical stress ball half of the ball on the left half on the right mold split at the equator. Specs: Ball: 65mm outer diameter, 6mm silicone wall, 53mm inner cavity. mold block: 100x100x55mm, hemisphere cavity centered 32.5mm deep. Top half (left half): 3 Bayonet tabs at 0/120/240 degrees on the rim, 18mm wide 8mm deep, 10mm tall 14mm pour hole at the top. Bottom half (right part): 3 matching groove same positions with a 30 degree arc sweep with hard stop at the end 4mm vent hole at the base. Both halves: flat parting face at the equator. two 4mm alignment pin holes in opposite corners, 10mm deep. Print flat face down no supports needed. output as two separate bodies. and make sure to put the bayonet tabs and grooves in the middle
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777598273
Anonymous1777598273