3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1776305930
04-27 03:20
Model Name
bracelet display 3d model
Tags
furniture
3d printing
realistic
Prompt
A clean, minimalist 3D printable bracelet stand designed for personal use, holding many bracelets. The model should be a single solid object with three horizontal cylindrical rods arranged in a vertical stack (tiered display). Each rod is parallel, evenly spaced, and about 100–120 mm long with a diameter of 14 mm. The rods are supported by one central vertical column connected to a wide rectangular base. The base should be thick and stable (about 120 mm wide, 60 mm deep, 10 mm thick) with rounded corners. The vertical support should be centered and about 150–180 mm tall. All edges should be slightly rounded for a smooth finish. The rods should have rounded ends and no sharp edges. The spacing between rods should be at least 35–45 mm so bracelets do not overlap. The entire model must be watertight, manifold, and optimized for FDM 3D printing with no thin fragile parts. Avoid overhangs greater than 45 degrees. design modern, simple, and sturdy, balanced proportions so it will not tip
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1776305930
Anonymous1776305930