3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1776944701
04-23 12:11
Model Name
bionic insect drone 3d model
Tags
vehicle
3d printing
realistic
Prompt
A technical, photorealistic 3D-printable structural frame for a bionic butterfly ornithopter, inspired by an insect thorax. The design is a unified, symmetrical exoskeleton optimized for FDM printing (PLA/PETG) with a target weight under 25g. 1. Central Electronics Housing (The Thorax): Dimensions: 55mm (L) × 32mm (W) × 18mm (H). Geometry: Rectangular enclosure with 1.5mm walls, filleted corners, and a smooth aerodynamic finish. Internal Layout: Precision cavity with 3mm standoffs for an Arduino Pro Micro (~34x18mm). A dedicated battery slot with 0.4mm tolerance for a 150mAh LiPo (30x20x6mm). Features: A flush, snap-fit top lid with a hexagonal lattice weight-reduction pattern. Integrated side ventilation slits and 2mm internal wire-routing channels. 2. Actuation System (Front Arms): Structure: Two rigid arms extending from the front-left and front-right at a 12-degree outward angle (30mm length). Mounts: Precision brackets for dual MG90-type servos (23x12x29mm). Servos are ori
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1776944701
Anonymous1776944701