3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1775023582
06-07 14:57
Model Name
injection mold 3d model
Tags
cylindrical
halves
injection
machine
machine realistic
machine rendering
machine rendering realistic
realistic
rectangular slot
rendering
rendering realistic
Prompt
A two-part split injection mold for a cylindrical syringe cover shown in exploded view, top half floating above bottom half. Both halves are identical in size: 280mm long, 80mm wide, 60mm tall, smooth gray aluminum, sharp clean edges, no organic curves. Top half: flat bottom parting face. Inner cavity is a perfect half-cylinder groove 168mm long, 48mm diameter running the full length centered. Left end has a clean hemispherical dome recess for the tip cap. Right end has a clean circular disc recess 44mm diameter for the plunger flange. A sharp rectangular slot 170mm × 24mm × 10mm recessed into the center of the groove for the window insert. One conical funnel fill port centered on the top surface pointing downward into the cavity. Two small 4mm circular vent holes on the top surface near each end. Two cylindrical steel alignment pins 6mm diameter protruding from the flat parting face near each corner end. Bottom half: same block dimensions as top half, same height. Flat top parting fac
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1775023582
Anonymous1775023582