3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1759618566
02-16 19:38
Model Name
modular robot 3d model
Tags
machine
machine realistic
machine rendering
machine rendering realistic
modular
modular robot
realistic
rectangular panel
rendering
rendering realistic
Prompt
Create a 3D model of a modular AI robot with a three-layer stacked design. Layer 1 (Bottom Layer): - A rectangular base chassis with rounded edges - Four DC geared motors, one at each corner - Four wheels attached to the motors - A central compartment on the base for a battery pack - A motor driver module (L298N) mounted near the center - Stable support feet or standoffs at the corners Layer 2 (Middle Layer): - A flat platform mounted above the base via four vertical standoffs - A Raspberry Pi board (centered) with visible GPIO pins - Wiring harness connecting Raspberry Pi to the motor driver - Space for cable management - A low-profile cover over the Raspberry Pi to suggest electronics Layer 3 (Top Layer): - A slightly raised rectangular panel supported by standoffs above the middle layer - A 7-inch horizontal display screen centered at the front - A stylized robot face displayed on the screen - A USB omni-directional microphone mounted at the top edge of the screen - A small USB speaker mounted symmetrically on the front panel below the screen - A Raspberry Pi camera module positioned above the screen, centered and facing forward - Space for additional sensor housings if needed General Aesthetics: - The robot body is modern, clean, and slightly curved - Each layer separated by cylindrical support posts - All components proportionally sized for a medium-sized mobile robot - Visible cable runs neatly organized between layers - The model should appear as a coherent single robot structure with distinct functional layers
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1759618566
Anonymous1759618566