3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1769507452
02-11 05:21
Model Name
wstążka baner 3d
Tags
props
3d printing
stylized
Prompt
Create a 3D model of a stylized ribbon banner inspired by embroidered biker patches. The ribbon should have a slightly curved, dynamic shape with a central split option. TECHNICAL REQUIREMENTS: - Total ribbon thickness: 2 mm. - Engraved text recessed into the ribbon by 1 mm (clean, sharp edges). - Raised outer contour (border) around the ribbon: 0.6–1 mm height above the surface, smooth and continuous, in the style of a bold embroidered outline. - Ribbon must be divisible along the centerline. GEOMETRY AND ANGLES: - The ribbon should extend backward at a 16° angle from the viewer. - After 3 cm of length, introduce a 90° fold (sharp bend). - After the fold, continue the ribbon at a 15° backward angle. - Maintain smooth curvature and natural ribbon flow between segments. STYLE: - Shape inspired by biker patch banners: slightly thick, bold, with subtle fabric-like curvature. - Edges gently rounded to avoid sharp corners. - No textures needed — clean geometry optimized for 3D printing. TEXT: - Engraved inscription: "KOCHAM POLSKĘ A TY JĄ KOCHAJ!" - Text centered, following the curvature of the ribbon. - Letters recessed 1 mm into the surface. PRINTING OPTIMIZATION: - Avoid thin walls. - Ensure border and text are clearly manufacturable at small scale. - Model should be watertight and manifold.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1769507452
Anonymous1769507452