3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1770268480
02-09 19:26
Model Name
display base 3d model
Tags
3d printing
3d printing realistic
design
display
display base
geometric
printable
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Create a 3D printable display base inspired by the provided reference image. The base is a flat square plate measuring 16 cm wide, 16 cm deep, and 2 cm thick. The overall shape is clean and solid, suitable for physical production. Engrave the geometric eye-and-triangle design from the reference image into the top surface of the plate. Since color is not used, all details must be created through depth. The engraved lines and shapes must be at least 0.5 cm deep to clearly define the design. At approximately 10 cm vertically from the top of the triangular shape, carve a straight recessed slot into the surface. This slot is designed to hold a figurine and should allow the figure to be inserted at a forward tilt of about 20 degrees. The slot should be clean, straight, and structurally strong. Because the plate thickness is only 2 cm, add a supporting structure underneath the slot: Install a cross-shaped support positioned vertically below the lower part of the triangle, facing it directly. The support should be angled to match the 20-degree tilt of the figurine and act as a brace. The cross-shaped support should be approximately 8 cm in total length, solid, and thick enough for stability. It must connect securely to the base without thin or fragile parts. Use clean, watertight topology optimized for 3D printing. Avoid sharp edges, floating geometry, or extremely thin details. All elements must be physically stable and printable.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1770268480
Anonymous1770268480