3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1779074299
05-18 12:27
Model Name
ice cream cone 3d model
Tags
3d printing
3d printing realistic
cone shaped
ice cream cone
lacrosse
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a 3D-printable lacrosse ball degreaser shaped like an ice cream cone. The design should be a two-piece clamshell that fully encloses a standard lacrosse ball (63.5 mm diameter) when closed. Requirements: * Make the outside look like a smooth ice cream cone with a rounded scoop top and a cone handle. * The cone should be smooth, not waffle textured. * The scoop section should split into two matching clamshell halves that open and close around the ball. * Leave about 2 mm of extra internal clearance so sandpaper can fit between the ball and the inside surface. * Add 4 square grip notches/protrusions evenly spaced inside the cavity so the lacrosse ball does not spin freely while twisting. * The handle should attach to the bottom half. * Make all parts separate printable objects. IMPORTANT PRINTING REQUIREMENTS: * Place every object completely flat on the build plate / ground plane (Z=0). * Nothing should float in the air. * Spread all pieces apart neatly so they are easy to 3D
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1779074299
Anonymous1779074299