3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1763526367
11-19 04:27
Model Name
beep keychain 3d model
Tags
3d printing
3d printing realistic
beep
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Create a clean and manufacturable 3D model of the keychain device shown in the image. Specifications: - The metal clip at the top must be completely removed. - The body should be a solid keychain device with rounded edges. - Final outer dimensions: height 45 mm, width 32 mm, thickness 6 mm. - Add a circular button hole on the front center, diameter 12 mm, fully cut through the shell (this hole is for inserting a real button component). - On the front surface, keep the "BEEP" text and the curved red signal lines embossed or engraved as shown. - On the back side, add 8 to 10 small speaker holes, arranged in a circular or grid pattern near the lower area. Each speaker hole should be 1.2–1.5 mm in diameter. - Add a small ring loop at the top of the device (not a clip), with an outer diameter 6 mm and inner diameter 3 mm, integrated into the body for attaching a keyring. - Ensure the shape remains faithful to the image but proportioned correctly based on the dimensions above. - Output a watertight mesh suitable for 3D printing (no open edges, no non-manifold geometry).
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1763526367
Anonymous1763526367