3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1774707231
03-28 14:24
Model Name
hinge mechanism 3d model
Tags
props
3d printing
realistic
Prompt
Create a compact hinge with a flat rectangular base and four screw holes, one near each corner. Add a hinge joint with two connected parts. One side is fixed to the base, and the other side is attached to a rectangular holder for a pole. The hinge should NOT rotate freely. It should only move between two fixed positions: flat (0 degrees) upright (90 degrees) The hinge must lock firmly into each position, so it stays in place and does not move unless force is applied. Use built-in stops or interlocking shapes inside the hinge to block any movement beyond these two positions. On the moving side, attach a rectangular holder that tightly fits a rectangular pole. This holder should move together with the hinge. Make the hinge area thicker and stronger so it does not break, and slightly round all outer edges.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1774707231
Anonymous1774707231