3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Rose Ackerman
04-08 22:25
Model Name
ultrasonic transmitter sensor 3d model
Tags
machine
3d printing
realistic
Prompt
Create a detailed 3D model of an ultrasonic transmitter sensor (TCT25-16T). The sensor has a cylindrical metal housing made of matte silver aluminum. The front face contains a circular recessed cavity covered with a fine black metallic mesh grille, through which a small concave ultrasonic diaphragm is visible at the center. The outer rim of the front face is slightly chamfered and forms a narrow bezel around the mesh. The back side of the cylinder is closed and flat, with two straight metallic pins extending from the center of the back surface. Pins are parallel, evenly spaced, and aligned vertically. Mesh depth is shallow, and the diaphragm should be visible behind it. Overall dimensions: approximately 16 mm diameter and 12 mm length. Do not add any logos, buttons, LEDs, or lenses. its has only 2 legs in back.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Rose Ackerman
Rose Ackerman