3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781565947
06-15 23:39
Model Name
dual rod holder 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a functional 3D printable mechanical part, not a decorative model. Generate a dual fishing rod holder for a bicycle based on the uploaded image. Requirements: Exactly 3 printable parts: One dual rod holder body. One upper adjustable clamp. One lower adjustable clamp. The rod holder mounts directly to a bicycle seat tube exactly like the reference image. No extension arms, no offset brackets, no hooks. Upper and lower clamps are independent and adjustable for round bicycle tubes from 28 mm to 40 mm diameter. Clamps use through-bolts and compression to tighten around the bike frame. Rod holder attaches to both clamps using bolt holes molded into the holder body. Holder contains two vertical rod tubes. Each rod tube has: 50 mm inside diameter. Open top. Large side cutouts. Rounded internal edges. Overall holder height approximately 190 mm. Wall thickness 5 mm minimum. Designed for PETG printing. Flat surfaces where possible. Functional engineering geometry.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1781565947
Anonymous1781565947