3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1775860533
04-11 13:10
Model Name
servo motor 3d model
Tags
machine
3d printing
realistic
Prompt
Create a precise 3D printable bottom case for a Hobbypark 20kg servo motor with accurate dimensions. The servo body measures approximately 40.5mm in length, 20.2mm in width, and 40mm in height, with mounting tabs extending the total length to about 54–55mm and mounting hole spacing of 49.5mm center-to-center using 3mm diameter holes. The design should include a flat base slightly larger than the servo, around 65mm by 35mm, with raised side walls that snugly fit the servo body while allowing about 0.5mm tolerance for easy insertion. Include properly aligned holes or slots for the servo mounting tabs, along with top-facing screw holes that allow the servo motor to be securely fastened down into the 3D printed base. Add four additional mounting holes on the bottom base for attaching the case to other structures. Include a dedicated side hole or cutout specifically sized for the three servo wires to exit cleanly from the side of the case, with enough clearance to prevent bending or pinch
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1775860533
Anonymous1775860533