3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773915226
05-05 11:45
Model Name
steamed bun 3d model
Tags
food
3d printing
realistic
Prompt
Create a realistic Chinese steamed bun 3D model for SLA/DLP resin printing and wax mold casting. The bun should be soft, round, slightly flattened at the bottom, with natural hand-pinched folds converging at the top. Add subtle dough texture, fine surface unevenness, and realistic steamed-bun skin, not cartoon style. Total height must be under 4.5 cm, preferably about 4.0 cm. Bottom diameter about 5.5–6.0 cm. Design the model as two separate left/right mold halves split along a vertical center plane. Add flat parting surfaces with alignment pins and matching holes. Allow 0.15–0.25 mm clearance. Include wax flow channels: one main injection port at the bottom or lower side, 4–6 mm diameter; internal or parting-line channels; and 2–3 small air vents from the top folds or upper side, 1–2 mm diameter. Channels should be smooth and mostly hidden. Make the model watertight, manifold, printable, with minimum wall/detail thickness of 1.2 mm. Output STL/OBJ-ready geometry.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773915226
Anonymous1773915226