3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1770934475
06-22 05:40
Model Name
round robot 3d model
Tags
character
character realistic
character rendering
character rendering realistic
realistic
rendering
rendering realistic
rotating
round robot
spinning
Prompt
Create a single-piece print-in-place spinning keychain for two standard 1.25-inch (31.75 mm) pin-back buttons. The design must have a 60 mm outer stationary ring with an integrated keychain loop and 5 mm keyring hole. Inside the ring, include a freely rotating 40 mm center disc captured permanently by a print-in-place bearing system using 0.3 mm clearance. The spinner must rotate smoothly after printing without assembly. The center disc should contain two snap-fit button pockets, one on each side, sized for 31.75 mm diameter, 6 mm thick pin-back buttons. Include flexible retention tabs or a 0.8 mm retaining lip so buttons snap in securely without glue. Hide the pin backs inside the spinner while leaving the button artwork fully visible from both sides. Total thickness about 13 mm. Add rounded edges and fillets for comfort. Model must be manifold, watertight, support-free, optimized for PLA FDM printing, and exported as a ready-to-print STL.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1770934475
Anonymous1770934475