3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1771693967
02-21 17:34
Model Name
industrial wristwatch 3d model
Tags
props
rendering
realistic
Prompt
Design a detailed 3Design a single, modern industrial safety wristband called “ShockGuard” for high‑voltage grid workers. It should look like a chunky, rugged smartwatch with a black matte plastic body, a dark silicone strap, and subtle high‑visibility yellow accents. The band itself should stay clean and minimal, but next to it, show a separate small external electronics board that contains all the complex circuitry used by the band. For the wristband/watch: Simple outer design with one side button and 2–3 LED indicators on top. A flat metal sensing plate (copper or aluminum) integrated on the underside of the watch body, insulated from the skin by a visible thin dielectric layer. The watch body can be shown as mostly hollow or with only minimal internals, since the main complexity is on the external board. For the external small board (placed beside or slightly behind the band in the scene): Show and clearly label a dense, realistic PCB with: An RC circuit section (multiple resistors and capacitors). A high‑impedance voltage buffer circuit (op‑amp stage). A compact rectenna module (planar antenna plus rectifier). A slim rechargeable lithium‑ion or lithium‑polymer battery and a simple power‑management IC. Use an exploded or close‑up view so all components are easy to see and look highly complex and engineered. Include a short cable or connector visually linking this external board to the band, suggesting it is a prototype or development board. Provide one main hero view of the band on a wrist with the external board displayed beside it, and one close‑up view focusing on the external board’s complexity so the RC circuit, buffer circuit, metal plate connection, rectenna, and battery are all clearly highlighted.D concept model of a modern, industrial safety **wristband/watch** called “ShockGuard,” intended for workers in high‑voltage grid environments. The style should be sleek and contemporary, like a premium smartwatch, but the model must clearly show and separate all internal components with labels, exploded views, and cutaway sections. Requirements: 1. **Overall look** - Rugged yet modern safety design, matte dark gray or black body with high‑visibility accents (electric yellow or orange). - Adjustable silicone or rubber strap with a textured, non‑slip pattern. - Main body roughly the size of a chunky smartwatch, with a small display/interface on top (simple status LEDs or a minimal screen). 2. **Internal electronics (show as exploded view)** Clearly model and label the following parts as distinct, realistically shaped components mounted on one or more PCBs: - **RC circuit** section with visible **resistors and capacitors** arranged logically. - A **high‑impedance voltage buffer circuit** (op‑amp stage) connected to the sensing plate and RC network. - A **rectenna** module for harvesting RF/electric‑field energy, consisting of a small planar antenna pattern and rectifier circuit. - A main **MCU/processing chip**, tiny passives, and connectors for the interface. 3. **Metal sensing plate** - Show a flat, slightly curved **metal plate** on the underside or side edge of the band as the primary sensing electrode. - Create alternate versions or a labeled callout comparing **copper, aluminum, nickel, and silver** as candidate materials, emphasizing **cost‑efficient metals** (copper and aluminum) in the main model. - The plate should be mechanically insulated from the skin by a thin dielectric layer, which is also visible in cross‑section. 4. **Power system** - Include a compact **rechargeable battery**, preferably a slim, rectangular **lithium‑ion or lithium‑polymer cell**, mounted beneath or beside the PCB. - Show contact pads or a simple charging interface (e.g., two pogo pins or a magnetic connector) on the underside or side of the case. - Optionally, visualize the rectenna feeding into a small **power‑management IC** and then into the battery. 5. **Interface and housing** - Simple **interface**: 1–2 buttons on the side and small LED indicators or a tiny screen on top for status/alert. Keep it minimal and **cost‑efficient**. - Rugged outer **housing** with IP‑rated sealing details (gaskets, screws), shown in one view as transparent so internal parts can be seen. - Use materials typical for low‑cost mass production: injection‑molded plastic case, silicone strap, and stamped metal plate. 6. **Presentation** - Provide multiple angles: front, side, back, and an exploded isometric view. - Include at least one cross‑sectional rendering that clearly displays layering: outer case, sensing metal plate, dielectric layer, PCB with RC and buffer circuits, rectenna, and battery. - Keep proportions and component sizes realistic for a wearable. Emphasize engineering realism, clear labeling of every listed component, and a modern industrial aesthetic suitable for an electrical‑grid safety device.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
