3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773764245
03-17 16:29
Model Name
lens mount bracket 3d model
Tags
props
3d printing
realistic
Prompt
Generate a 3D model based on this data: Main Shape: Two flat panels connected at a 90° angle. Panel A (Vertical/Mounting): Rectangle. Features a large central opening (for the lens) and mounting holes in the corners. Panel B (Horizontal/Visor): Rectangle projecting forward to shield from overhead light. Dimensions (in millimeters, interpreted from the sketch): Total width: ~80 mm. Height of the vertical wall: 54 mm or 55 mm. Visor projection (depth): 50 mm. Material thickness: 3 mm. Main lens hole (largest): Diameter 40 mm (centered). Small holes (for ventilation/mounting?): Four holes with a diameter of 10 mm in the corners of the vertical plate. Additional cutouts: There is a rectangular notch (slot) on the side of the vertical wall measuring approximately 15x15 mm? (On the right side when viewing the drawing). Technical Requirements: Material: Matte black ABS plastic. Is the part symmetrical? (Based on the dimensions, this needs clarification from the image). Chamfers on edges: 1 mm.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773764245
Anonymous1773764245