3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1771447861
03-25 08:20
Model Name
floorstanding speaker 3d model
Tags
props
rendering
realistic
Prompt
Photorealistic high-end floorstanding loudspeaker, based on the attached dimension sheet and current render. Keep the lower woofer cabinet clean white. Keep two black woofers vertically aligned in the white cabinet, with metal spikes at the base. The upper section must be corrected: it is not a rectangular closed box. It is an open-baffle top module for the tweeter and midrange only. The front baffle is birch plywood end-grain with visible laminated stripes, and it has left and right side wings that are 30 mm deep in the same birch end-grain material. Behind that front baffle, the top section remains visually open, not boxed in. Place the AMT tweeter above the midrange on this birch open baffle. Maintain the proportions from the drawing: front width about 356 mm, total cabinet height about 866 mm, top baffle about 356 x 400 mm. Keep the driver spacing consistent with the drawing sheet. Show the speaker in a refined studio/interior setting with soft natural light, concrete
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
