3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768562167
01-16 11:31
Model Name
quadrotor drone 3d model
Tags
3d printing
3d printing realistic
quadcopter frame
quadrotor
quadrotor drone
realistic
vehicle
vehicle 3d printing
vehicle 3d printing realistic
vehicle realistic
Prompt
"Please design a 3D printable frame for a quadcopter drone. This is for a micro drone using coreless motors. The design must be based on the attached/discussed reference image and adhere to the following exact dimensions and layout." Critical Dimensions & Layout (The "Rules"): PCB Main Board: "The central main board is a custom PCB. Its exact dimensions are 63mm in length and 48.8mm in width. The thickness is 1.6mm. This PCB is the core of the frame and must be fully enclosed." Motor Specifications (Most Important): "The drone uses four coreless motors. The distance from the motor shaft to the center of the frame (the motor arm length) is 55mm." "The diameter of the motor's housing is approximately 7mm (please verify if you are using 716 or 820 motors)." "Design the motor mounts to be compatible with common coreless motor holders. Include holes for M2 screws (drill hole diameter should be 2.2mm)." Frame Geometry: "The wheelbase (diagonal distance between opposite motors) should be a
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768562167
Anonymous1768562167