3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777384375
04-28 15:13
Model Name
circular tpu cap 3d model
Tags
props
3d printing
realistic
Prompt
Technical 3D model of a circular TPU cap (55mm diameter, 2mm thick lid). A 10mm high, 2mm thick cylindrical wall descends from the lid. Crucially, the upper 8mm of the wall must be perfectly solid and smooth with NO holes. The interlocking anchor structure is concentrated exclusively in a single horizontal row at the very bottom edge of the wall. This anchor zone consists of a strictly alternating, co-planar array: one 1mm diameter circular hole drilled horizontally through the 2mm wall, followed by a 1mm gap, then one 1mm thick solid rectangular spoke extending 4mm outward, followed by another 1mm gap. These holes and 4mm-long spokes must be perfectly aligned on the same horizontal plane at the wall's base to create a seamless, integrated ladder-like ring around the entire circumference. Optimized for manifold geometry and FDM 3D printing
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777384375
Anonymous1777384375