3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1781623166
06-22 15:59
Model Name
scent device 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Tripo Studio Prompt Design a compact premium handheld scent device inspired by Air Up, but it must not resemble a vape. The product should have a modern Scandinavian design with smooth rounded edges, a minimalist appearance, and a comfortable ergonomic grip. The device should be approximately 68 mm tall, 42 mm wide, and 20 mm thick. The body should contain a fully removable cylindrical pod that attaches magnetically using four 5×2 mm neodymium magnets. Include magnet pockets so the magnets can be glued in after printing. The pod must have a threaded screw-on lid that can be opened by hand to replace the scent insert. Inside the pod, create a cylindrical scent chamber approximately 18 mm in diameter and 15–20 mm deep. At the top of the pod, include a 6.9 mm diameter hole designed for a 7 mm food-grade silicone tube. The tube should insert about 12 mm into the pod and be secured with glue. Add a small internal stop so the tube cannot slide too far inside.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1781623166
Anonymous1781623166