3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1771503879
02-20 05:50
Model Name
industrial grinding mill 3d model
Tags
machine
rendering
realistic
Prompt
Upgrade You said: Uploaded image Uploaded image The design of the fabricated machine is made by considering all aspects and has been constructed in a way that the design is easy to handle and the system functions accordingly. The design is separated into three phases as it contains many processes in it. The cost of design and fabrication of the machine is reasonable. The first phase is the design of the inlets i.e. hopper which is made of sheet metal and they are parted into three inlets namely inlet 1, inlet 2 and inlet 3 respectively, were inlet 1 and 2 is cover with a lid which is made using the same material. Raw materials are fed in the inlets 1 and 2 and an AC motor of 230v 3000rpm (with speed adjustment) assembly is fixed as shown in the Figure 3.1 below to the inlet 2, which is connected to the power supply. The motor is covered with a frame made of sheet metal, and the grinding process takes place. The second phase is the bottom of the hopper where iron pipes are attached separately to each of the respective inlets and then fixed to the mixer section in the center. The mixer section in the middle is fixed with blades which also gets the same power supply, in which the blending process is done. And for the final phase an iron pipe is welded at the bottom of the mixer section, where a valve mechanism is fixed at the end of the iron pipe. This is attached to the tool die setup with a handle in which the plate gets compressed. The tool die is fixed with a balance stand with four legs made of iron pipes along with each ring washers in it. So that the total fabricated machine can stand with a balanced position in the surface. Could you please create 3d model
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
